Function
Rook's each Remote Monitoring and Control unit (RMC) will be connected & communicate with each turbine without any modification on turbine's control electronics. It monitors the turbine & sends the details automatically to Operator, Supervisor & Web, according to status of turbine. RMC receives query/control message from Operator, Supervisor and execute it accordingly.
Each RMC will be fitted with one SIM card for GSM/GPRS connectivity. We can choose a SIM card from any GSM network providers subject to good signal strength at the turbine location. Even different GSM network SIM cards within one site can be used. RMC comes with portability as it can be removed from one turbine and fixed to another at any time as it is plug & play model.
Operator: One or two predefined phone numbers of operator will automatically receive SMS message of all kinds of turbine stoppages with description (Manual stop, Grid drop & Break downs name) along with turbine's all parameters of Temperatures, Wind speed, RPM, Hub motor, Yaw motor, Capacitor bank, Brake, Generating KWh, Reactive power and Grid three phase volt & current. The operator can control the turbine (start, stop) by sending suitable SMS command. Site Operator can reset the turbine to generation mode by a simple SMS from his mobile phone. The operator can send a SMS query to the RMC at anytime from anywhere and monitor the functional status of turbine with parameters by receiving reply SMS.
Supervisor: One predefined phone number of supervisor will automatically receive SMS message when ever turbine stops due to Major Break down (Vibration, Current asymmetric, WP 2060, Brake worn out, Repeating error...). Supervisor can monitor the turbine by sending a SMS query. He can monitor inverted signals and turbine peak values through SMS.
Owner: One predefined phone number of owner will automatically receive generated units of KWh, number of operated hours at a specific time say 8 o'clock. Owner too can monitor the turbine by sending a SMS query.
Web (Central Monitoring Station): RMC will update all details to Web. It update whenever the turbine changes from one status to another status (like Running, Manual Stop, Freewheeling, Breakdowns, Grid drop & restore...) with turbine's all parameters of Temperatures, Wind speed, RPM, Hub motor, Yaw motor, Capacitor bank, Brake, Generating KWh, Reactive power and Grid three phase volt & current. RMC will update web on a particular interval, if turbine prevails in a same status for long time say 15 minutes. All remote stop/start operations are recorded at web with their phone no. Every updates will have Date & time stamp. Various reports of Daily, Monthly, Turbine, and Site wise can be generated.
Web page is secured and it can be accessed with user name & password only.
Site office in charge can log in with one user name & pass word. Each site office can monitor live status of the turbines under their control, get various events log and generate reports of the turbines individually, group wise and site wise.
Head office in charge can log in with another user name & pass word. Head office can monitor live status of turbines of all sites, get various events log and generate reports of turbines individually, group wise and site wise
Safety: RMC can be accessed only by the operator and supervisor. The unauthorised access attempt will be notified at Web. It is physically safe as it is kept in the closed environment of turbine's control room. Every RMC unit comes with lighting protection. RMC comes with door sensor and buzzer. Whenever door is opened unauthorised it sends security alarm message to operator and security guard, the same will be updated at web... This helps in preventing power cable theft.
Warranty/Service: RMC comes with one year warranty. We provide service support by AMC or on call basis after warranty period.